pppoe
 BACK ..
 PPPOE-Installation aus dem FreeBSD-Handbuch:
 ============================================
    #FreeBSD Handbook PPP and SLIP Using Kernel PPP Using SLIP
               FreeBSD Handbook
    ______________________________________________________________________
 16.4. Using PPP over Ethernet (PPPoE)
    Contributed by Jim Mock <jim@FreeBSD.org> (from node.to) 10 Jan
    2000.
    The following describes how to set up PPP over Ethernet, a.k.a, PPPoE.
 16.4.1. Prerequisites
    There are a few requirements that your system will need to meet in
    order for PPPoE to function properly. They are:
      * Kernel source for FreeBSD 3.4 or later
      * ppp from FreeBSD 3.4 or later
 16.4.2. Kernel Configuration
    You will need to set the following options in your kernel
    configuration file and then compile a new kernel.
      * options NETGRAPH
    Optionally, you can add
      * options NETGRAPH_PPPOE
      * options NETGRAPH_SOCKET
    although if this functionality is not available at runtime, ppp will
    load the relevant modules on demand
 16.4.3. Setting up ppp.conf
    Here is an example of a working ppp.conf:
     default: # or name_of_service_provider
       set device PPPoE:xl1 # replace xl1 with your ethernet device
       set mru 1492
       set mtu 1492
       set authname YOURLOGINNAME
       set authkey YOURPASSWORD
       set log Phase tun command # you can add more detailed logging if you wish
       set dial
       set login
       set ifaddr 10.0.0.1/0 10.0.0.2/0
       add default HISADDR
       nat enable yes # if you want to enable nat for your local net
     papchap:
       set authname YOURLOGINNAME
       set authkey YOURPASSWORD
    Care should be taken when running PPPoE with the -nat option.
 16.4.4. Running PPP
    As root, you can run:
     # ppp -ddial name_of_service_provider
 16.4.5. Starting PPP at Boot
    Add the following to your /etc/rc.conf file:
     ppp_enable="YES"
     ppp_mode="ddial"
     ppp_nat="YES"
     ppp_profile="default" # or your provider
    ______________________________________________________________________
       For questions about FreeBSD, e-mail <questions@FreeBSD.org>.
    For questions about this documentation, e-mail <doc@FreeBSD.org>.
   [IMG]